Makita CL111D Manual De Instrucciones página 7

► 1 . Securing lip
4. Clean out the fine dust and lightly tap to dislodge
dust from high performance filter.
Reassembly
Reassembly for normal filter
1. Put on filter until it is fully in position on the cleaner
unit.
► 1 . Filter
► 1 . Filter
1
1
1
NOTE: Make sure filter is put on straight without
being peeled back. If filter is put on incorrectly as
shown in diagram, dust will get into motor housing,
and cause motor failure.
2. Connect prefilter. At this time, make sure to twist
prefilter so that securing lip is firmly locked into cleaner
unit.
► 1 . Prefilter
3. Connect capsule. Align O mark on capsule with O
mark on handle and then firmly twist capsule in direction
of arrow until it is secured.
► 1 . O Mark
7 ENGLISH
1
1