Fermax SKYLINE DUOX Manual De Instalador página 40

DUO X X X X X A A A A A udio Sk DUO DUO udio Sk udio Sk
DUO DUO udio Sk yline udio Sk
DUO DUO X X X X X A A A A A udio Sk DUO udio Sk udio Sk
udio Sk yline
DUO DUO udio Sk
EN
DUOX Amplifier Call:
•
You can use the buttons with keypads to make direct calls
to specific apartments (professionals).
•
2 simultaneous conversation channels on the same pair.
•
The house terminal´s address is encoded with 6 digits
(calling code). The default value is 000000, (this can´t be
called from any street panel).
•
Panels with an address «0» in each block allow for
communication with telephones when disconnected if the
communication line is free. Communication is established
with the «0» panel of the block corresponding to the
telephone. If you do not want this feature do not assign
this address to any panels.
•
A telephone with the address 000000 can not establish
communication upon disconnecting.
•
If there are panels in the sub-block, no connection is made
upon disconnection, only with panel 0 of the block.
•
A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence number +
bell. You do not need to enter the 6 digits. If a shorter
code is entered, it is filled in with «0» to the left. The
letter «A» can be used to delete the sequence entered.
Pag 40
yline yline
yline yline
yline yline
yline
yline