Preparing for use
When all components have been cleaned as described
under "Cleaning":
➩
Position the appliance such that, ...
– that the power cable
cess at the rear of the appliance,
– the power plug is immediately accessible, so that
it can be quickly withdrawn in the event of
danger.
– that it is stable and not liable to slip, and such
that the suction cups find a firm hold so that the
appliance cannot tip over due to vibration.
– that the power cable
area and thus not presenting a risk of being inad-
vertently snagged and tipping the appliance
over.
Operation
Warning!
The motor switches itself off as soon as the mixing
jug
is removed from the motor block
e
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixing jug
Therefore:
• First insert the power plug into the wall socket
when the mixer jug
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug
pliance off, remove the power plug and wait for
the motor to stop revolving.
passes through the re-
y
is not in the working
y
. It could
u
is replaced on it:
e
is filled and mounted with
e
, switch the ap-
e
Filling and mounting the mixer jug
➩
Take the mixer attachment
and remove the lid
u
➩
Fill the mixer attachment
lid
w
firmly back onto the mixer attachment
Ensure that the pourer nose on the mixer attach-
ment
is also closed.
e
➩
Insert the filling cap
secure it by turning it clockwise.
➩
Place the ready filled and sealed mixer jug
onto the motor block
jug
until you can press it down. The motor
e
can start only when the mixer jug
positioned.
Selecting operating speeds
When the mixer jug
and securely fitted to the motor block
then switch the appliance on.
➩
Place the switch
– Level 1-3
for fluid or soft foodstuffs, for mixing, blending
and stirring
– Level 3-5
for firmer foodstuffs or for hacking
– Level Ice Crush/Clean
for short, powerful impulse operation, e.g. for
crushing icecubes or when cleaning. So as not
to overburden the motor, the switch
engage in this position. Hence, hold the switch
in this position for short periods only.
t
Notice
Fill the mixer attachment
180 g of ice cubes. If filled with more than this, the
appliance cannot optimally crush them.
- 34 -
e
from the motor unit
.
w
and then press the
e
q
into the lid opening and
u
. Lightly turn the mixer
is securely
e
e
is filled, completely sealed
, you can
u
on ...
t
t
with a maximum of
e
e
.
e
does not