Environmetal Protection; Technical Specifications - Metabo BHE 2444 Instrucciones De Manejo

10. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.

11. Environmetal Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.

12. Technical Specifications

Explanatory notes on the information on page 3.
Changes due to technological progress reserved.
P = rated input
1
P = rated output
2
I = Current at 120 V
120 V
n = no-load speed
1
n = load speed
2
ø max = max. solid drill diameter
s max = max. impact rate
W = single impact energy
m = weight
D = spindle collar diameter
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Wear ear protectors!
ENGLISH en
7