INSTALLATION
INSTALL THE FURNACE IN A WELL-VENTILATED PLACE, ON A BENCH-TYPE
TABLE, MOVING AWAY CURTAINS AND INFLAMMABLE MATERIALS.
Verify if the furnace specified tension is compatible with the power grid tension (110 volts).
Verify if the electric wire gauged is compatible with the furnace's power. Follows in the
table below the minimum gauge for each type of furnace and the recommended fuse.
Model
3000
Use an individual outlet to plug in the equipment; never utilizes any kind of multiple inlet.
If possible, install the fuse before the outlet that will feed the equipment.
220 Volts
Fuse 10 A
Wire
02