EDG 3000 Manual De Instrucciones página 19

( C)
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
20 50
ABOUT THE KEYBOARD:
1 - To reset or type a number - Resetting: Press continuously the key
number 0 blinks on the display. Press key until you get the desired value.
2 - To the next digit: Press the button
desired digit is leapt, press continuously the bottom
To turn back to the first digit, you should process the same way as described above.
3 -If the number blinking is the desired value you don't need to program it again.
Press the button " " to pass to the next digit.
82 92 112 127
TIME (min)
(3) until the display starts to blink in the desired position. In case of
until you get back to the desired position.
(2) until the
06