Publicidad
Idiomas disponibles
Idiomas disponibles
4- BLOCKED PROGRAMMING
In process where is needed just 1 or 2 temperature levels, its possible to program that blocks non-desired
levels.
This resource facilitates programming in such cases. For this reason, its important to initiate the
programming ALWAYS FROM THE CYCLE 1 and programming the parameters level that should
not be executed with value 0.
Example:
T1 , V1 P1 = 0 Do not execute programming
T2, V2, P2 = 0 Executes level 1.; cancel 2 and 3
T3, V3, T3 = 0 Executes level 1 and 2; cancel 3
5- STEADY PHASE MONITORING
In order to verify the remaining time to the level that has been executed, press the button " " (3).
The remaining time will be shown for 2 seconds after that the display returns to show the temperature
automatically.
6- PROGRAM CHANGING DURING OPERATION
In any given moment during the heating process the programming can be modified, by pressing
the corresponding parameter key. The LED will lit at the desired level; modify the value with the
keys
and
.
In order to return to the burning process, press the modified parameter key till the PROCESS LED lit.
Note: This modification will not be kept on memory.
11
Publicidad
