PlastMix 15
3
TRANSPORT
CAUTION! Before moving the mixer, always
detach the power plug.
Before moving the mixer, disconnect the water supply hose.
Only a minimal amount of the material (MAX) should be in the
hopper when handling.
Lift the mixer and push in the required direction (fig.2).
To facilitate transport, the machine can be disas-
sembled as shown in fig. 3.
2
3
1
3.1
TRANSPORT USING A CRANE
CAUTION! Before lifting the mixer, always
check that all machine components are
correctly secured and fitted in place and no
objects have been left on the surface.
CAUTION! Lift with care to avoid hazardous
oscillations.
CAUTION! Never use points other than as
specified in figure 4 to lift the machine.
To lift the machine, use the 2 specific attachment rings (fig.4).
A
B
GB
B
A
19