Ford Escape 2005 Guia Del Propietario página 519

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Insert a screwdriver or similar
tool straight down into the access
hole and press downward while
pulling the gearshift lever out of the
P (Park) position and into the N
(Neutral) position.
4. Remove tool and reinstall BTSI tethered cover cap.
5. Start the vehicle and release the parking brake.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your dealer or a qualified service technician as soon as possible.
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English (fus)
Driving
193

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido