a) To change the number of slices, press the
center of the TEMP/TIME (Darkness/
Slices) dial until the LCD screen displays a
flashing 'SLICES'. Turn the dial to the left
to reduce the number of slices, or to the
right to increase the number of slices. The
number of slices range from '1' to '4'.
NOTE
Your customized TOAST darkness setting and
number of slices will remain in the memory of
the oven until you change them or unplug the
oven from the power outlet. When the oven is
plugged back into the power outlet, the TOAST
function will automatically return to the
preset darkness setting '4' and preset number
of slices '2'.
6. Press the START/CANCEL button to
activate this setting. The button surround
will illuminate red, the oven alert will sound
and the LCD screen will illuminate orange.
7. The timer will be displayed and begin to
count down. The time can be adjusted
during the toasting cycle by turning the
TEMP/TIME dial.
NOTE
Element iQ
will automatically adjust the
®
toasting time depending on the heat already
present inside the oven. For example, if
the oven is already warm after one cycle of
toasting, the toasting time for the second cycle
will be less.
During the toasting cycle, condensation may
form on the oven door and steam may be
emitted. This is normal. Condensation and
steam occur as a result of the moisture content
of the bread. Freshly baked and frozen breads
generally produce more condensation.
8. At the end of the toasting cycle, the oven
alert will sound three times. The START/
CANCEL button surround will no longer
illuminate red and LCD screen will
illuminate blue.
IMPORTANT
The outer surface of the oven, including the
oven door, is hot during and after operation.
Always use protective hot pads or insulated
oven mitts when inserting, removing or
handling items from the oven.
9. At the end of the cooking cycle, the oven
alert will sound three times. The START/
CANCEL button surround will no longer
illuminate red and LCD screen will
illuminate blue.
10. The toast cycle can be stopped at any time
by pressing the START/CANCEL button.
This will cancel the cycle. The button
surround illumination will go out and the
LCD screen will illuminate blue.
NOTE
Default temperatures and times shown in the
illustrations in this section may vary from
those displayed on your oven.
19