General Safety Instructions - LaserLiner SuperCross-Laser 2P Manual De Instrucciones

Completely read through the operating instructions, the "Warranty and Additional Information" booklet as
!
well as the latest information under the internet link at the end of these instructions. Follow the instructions
they contain.This document must be kept in a safe place and if the laser device is passed on, this document
must be passed on with it.
The automatic cross-line laser with plumb function and integrated hand-held receiver mode
for aligning tiles, wall studding, windows, doors etc.

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions wherever possible and
identify the laser area with warning signs.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
SuperCross-Laser 2P
07
EN