Publicidad
Idiomas disponibles
Idiomas disponibles
9
11
II
Note
14
When mounting the basic carrier bars on C-Class (model
series W 204), E-Class (model series W 212), and the
E-Class Coupé (model series C 207), equipped with the
optional sliding/pop-up roof (Code 413), make sure that the
covers (see arrow) are in between the protective
enclosure (14) and the mounts (15).
12
4
10
15
M+P-03F-6650
1
12
4
7
9
2.
Place the basic carrier bar (1) in the correct position on
the vehicle roof, as indicated at the front left anchorage
point (7), and check if the screws (9) are located directly
over the fastening points (10). If necessary, using the
tool (4), loosen the screws (12) on both sides and position
the basic carrier bar (1) so that the screws (9) can be
tightened by hand.
3.
Lift the lever (11) and tighten the screws (9) by hand.
Important
The levers (11) serve to tighten the screws (9) and
prevent the screws from coming loose.
4.
Tighten the screws (9) with the levers (11), and
position the levers (11) in such a way (e.g. to position I or II)
that the cover caps can be fitted.
5.
Tighten the screws (12) using the tool (4).
- 7 -
I
11
10
M+P-03F-7325
Publicidad
