Publicidad
Idiomas disponibles
Idiomas disponibles
6
6.
Fit the cover caps (6) and lock them with the key (3).
7.
Fit the rear carrier bar in the same manner.
G
Risk of injury and accident
Each time the basic carrier bars and/or
accessories are fitted to the roof, before each trip
and periodically during longer journeys, check all
the screws on the basic carrier bars to make sure
that they are secure, and retighten them if
necessary. Repeat these checks at regular
intervals depending on road surface conditions
and after every 1500 miles (2500 km) of
continuous use.
Do not use any lubricant on the screws of the
basic carrier bars. The screws could work loose,
causing the basic carrier bars and the load to
become detached from your vehicle and thus
injure you and others and/or cause damage to
property, including damage to your vehicle.
Removal
To remove the basic carrier bars, follow the installation
instructions in reverse order.
Attaching the cover strips
If no accessories are fitted, then the cover strips should be
attached in order to minimise wind noise.
3
6
M+P-03F-7331
- 8 -
Universal roof equipment range
M+P-03F-5734
Publicidad
