Publicidad
Idiomas disponibles
Idiomas disponibles
6
6.
Place the cover caps (6) back on and lock them with
the key (3).
7.
Follow the same procedure to mount the rear basic
carrier bar.
G
Risk of injury and accident
Each time the basic carrier bars are mounted to
the roof, before each trip and periodically during
longer journeys, check all the screws on the basic
carrier bars to make sure that they are secure,
and retighten them if necessary. Repeat these
checks at regular intervals depending on road
surface conditions and after every 1500 miles
(2500 km) of continuous use.
Do not use any lubricants on the screws of the
basic carrier bars. The screws could come loose,
causing the basic carrier bars and the items they
are transporting to become detached from the
vehicle, possibly injuring you and others and/or
causing damage to property, including damage to
your vehicle.
Removal
To remove the basic carrier bars, follow the installation
instructions in reverse order.
Attaching the cover strips
If no accessories are mounted, then the cover strips should
be attached in order to minimize wind noise.
3
6
M+P-03F-7331
- 36 -
Universal roof equipment range
M+P-03F-5734
Publicidad
