Operation - Nordcap TR-RED 3/1 Manual De Instrucciones

OPERATION

A = CONTROL UNIT
B = ON-OFF SWITCH
C = WATER ALARM LIGHT
D = LIGHT SWITCH
CONTROL UNIT
During standard operation, the control unit displays the temperature of the heated compartment.
The display also has some icons which indicate the machine operations.
There are 3 control buttons on the right side.
Setting of heated compartment temperature:
- Press the SET button.
- Use the arrow buttons to increase or decrease the temperature.
- Confirm pressing the SET button.
Icon Function
heating
fan
defrosting
aux
alarm
clock
Standard operation
Button
Pressing individual button
for 4 sec alternates on/off status
for 4 sec activates/deactivates
defrosting
- for 1 sec set point
- for 3 sec parameters on
- stops alarm
A
Standard operation
On
on
on
on
output on
all
RTC present and enabled.
At least one time band has
been set
B
Off
off
off
off
output off
none
RTC absent, disabled or no
time band has been set
Pressing combined
buttons
pressed together
activate/deactivate
continuous cycle
---
C
Blink
requested
requested
requested
---
---
---
Start up
---
for 1 sec displays
pressed together
firmware version
activate
parameter
for 1 sec total
RESET
RESET
D
Start up
ON
ON
ON
ON
ON
ON if RTC
present
11