Nordcap TR-RED 3/1 Manual De Instrucciones página 31

ASSEMBLING THE SUPERSTRUCTURE (INSTALLATION)
The way the superstructure is assembled depends on the following situations:
- Assembling "Easy 1" for Drop in and Essence delivered with the superstructure dismantled.
- Assembling "Easy 2" for Drop in with the superstructure delivered after the heated compart. has been delivered.
- Assembling "Easy 3" for Tradition delivered with the superstructure dismantled.
For the Drop in display case models, the superstructures must be assembled following the exploded drawings.
ASSEMBLING "EASY 1"
Take the superstructure with the rapid coupling on the electric lead,
Connect the superstructure connector 'Z' to the connector on the heated compartment.
Fix the uprights 'Y' with their screws,
Place the seals above the uprights.
Fix the glass 'K' with its screws.
13