Drop In Display - Nordcap TR-RED 3/1 Manual De Instrucciones

DROP IN DISPLAY

Models display in addition to controlling the temperature of the heated compartment control even moisture.
A = PRODUCT PROBE
B = DIGITAL THERMOMETER
C = CONTROL UNIT
D = ON-OFF SWITCH
E = HUMIDITY CONTROL
PRODUCT PROBE
These probes are necessary to measure the internal temperature of the food inside the machine.
DIGITAL THERMOMETER
This tool displays the temperature probe product.
HUMIDITY CONTROL
With this device, you can adjust the temperature of the Pan collection water that in turn determines the humidity
inside the machine. The higher the value you set temperatures and higher humidity. The lower the value of the
lower temperature and humidity.
For further reading see chapter OPERATION.
.
18