Balluff BTL7-S5 M J-DEXC-TA12 Serie Manual De Instrucciones página 64

BTL7-S5_ _ (_)-M_ _ _ _-J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
9
Accessories
Accessories are not included in the scope of delivery and
must be ordered separately.
9.1 Floats
Only the floats listed here may be used as magnets for
measuring the level in zone 0.
Ordering code
Weight
Housing material
Pressure rating
Operating
temperature
Minimum density
Immersion depth
Density = 1 g/cm (H O)
3
2
Density = 0.7 g/cm
3
Installation position
Spacer sleeve
The distance sleeve is included in the scope of delivery of
the following floats:
– BTL2-S-4414-4Z-EX
– BTL2-S-4414-4Z01-EX
– BTL2-S-5113-4K-EX
24 english
BTL2-S-6216-8P-EX BTL2-S-5113-4K-EX
BAM014E BAM014A
69 g 34 g
Up to 15 bar Up to 40 bar
0.6 g/cm 0.7 g/cm
3
~41 mm ~26 mm
~57 mm ~40 mm
Cylindrical part is the Raised marking on the
top side of the float top side of the float
BTL2-S-4414-4Z-EX
BAM0147
34 g
Stainless steel
Up to 20 bar
–20°C...+120°C
0.7 g/cm
3 3
~30 mm
~39 mm
Raised marking on the
top side of the float
Ignition protection "d"
Flameproof enclosure
BTL2-S-4414-4Z01-EX
BAM0148
52 g
Up to 20 bar
0.85 g/cm
3
(= float density)
~45 mm
Immersed
Two raised markings
on the top side of the
float