Maintenance; Clean The Machine; Clean The Collection Bag; Clean A Blocked Tube / Impeller - GreenWorks BVA803 Manual Del Operador

Use rakes and brooms to loosen the unwanted material
before you blow.
Use the low speed to move dry items, and high speed to
move heavy items such as large unwanted materials or
gravel.
11

MAINTENANCE

CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Disconnect the plug from the power source before
maintenance.
11.1

CLEAN THE MACHINE

CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
NOTE
NOTE
English
• Clean the housing and the plastic components with a
moist and soft cloth.
11.2

CLEAN THE COLLECTION BAG

• Wear safety glasses and a dust mask.
• If it is necessary, clean the bag 1 time a year or more.
1. Remove the bag.
2. Turn the bag inside out.
3. Hang the bag up and clean it.
4. Hang the bag to dry.
5. Turn the bag right-side out and install it again.
11.3 CLEAN A BLOCKED TUBE /
IMPELLER
1. Wait until the machine fully stops.
2. Remove the blower tube or mulcher tubes and the bag.
3. Remove the material that causes a blockage of the tube or
impeller.
4. Make sure that the impeller has no damage.
5. Turn the impeller with the hand to make sure that there is
no blockage.
6. Install the blower tube or mulcher tubes and the bag.
Avoid the intake of large objects that could damage the
impeller.
11.4

ADJUST THE SHOULDER STRAP

1. Pull the tab to increase the length of the shoulder strap.
2. Pull the strap to decrease the length of the shoulder strap.
11.5

EXAMINE EXTENSION CABLES

• Look carefully for deterioration, cuts or cracks in the
insulation.
• Examine the plug for damage.
• Replace cables if defective or damaged.
12 TRANSPORTATION AND
STORAGE
Disconnect the plug from the power source before
tranportation and storage.
12.1

MOVE THE MACHINE

• Only hold the machine with the handgrip.
12.2

STORE THE MACHINE

• Clean the machine before storage.
9
WARNING
WARNING
EN