Tabla de contenido
Publicidad
Place the tool with the nozzle up on a surface where it
cannot be tipped over.
To speed up the cooling time, run the tool on a low
minimum temperature setting for a few minutes before
switching off.
Maintenance
The tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactorily operation depends upon proper tool care and
regular cleaning.
Regularly clean the ventilation slots with a clean, dry
paint brush.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Connect the green/yellow lead to the earth terminal.
Warning! Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stayer product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
ENGLISH
13
Technical data
Construction
Power input
Amps absorbed
Temperature range
Airflow (caudal)
Weight
The values given are valid for nominal voltages [U] of
230/240 V ~ 50/60 Hz - 110/120 V ~ 60 Hz. For lower
v oltage and models for specific countries, these
values can vary.
Please observe the article number on the type pl ate of your
machine. The trade names of the individual machines may
vary.
EC Declaration of conformity
SUH2000E / SUH2000EK / SU650EDK
Stayer declares that these products conform to:
EN 60745-1, EN 60335-2-45,
EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
according to EU Regulations
2006/42/EC, 2014/30/EU,
L
(sound pressure) 75 dB(A),
pA
hand/arm weighted vibration < 2,5 m/s
Ramiro de la Fuente
Director Manager
13
SUH2000E/SUH2000EK
-
Class II
W
2.000
A
9
ºC
I:50-450 II:90-600
l/min
250-450
kg
0.9
2014/35/EU
January 5, 2017
SU 650 EDK
-
2.000
9
50-650
250-500
0.9
2
Publicidad
Tabla de contenido
