Objetos Para Ajustes De Red - Festo CPX­ FB36 Manual De Instrucciones

C. Objetos de EtherNet/IP del CPX-FB36
C.2

Objetos para ajustes de red

C.2.1 "Device Level Ring Object"
C-8
Clase de objeto: 71
Instancias: 1
Atr. Acceso Descripción
N.°
1 Get Current network topology mode
0: Linear
1: Ring
2 Get Current status of network
0: Normal
1: Ring Fault
2: Unexpected loop detected
3: Partial network fault
4: Rapid fault / restore cycle
10 Get Active Supervisor Address
– Supervisor IP address
– Supervisor MAC address
12 Get Capability Flags
Bit 0:
Bit 1:
Bit 2 ... 4: Reserved. Shall be set
Bit 5:
Bit 6 ... 31: Reserved. Shall be set
Bits 0 and 1 are mutually exclusive
1) è Especificación de EtherNet/IP, capítulo 9-5.4
Tab. C/6: Ajustes de red con objeto Device Level Ring
d
Announce-based
1)
RingNode
Beacon-based
1)
RingNode
to zero
Supervisor Capable
to zero
Festo CPX-FB36-ES es 1611a Español
Tipo
USINT
USINT
STRUCT of
UDINT
ARRAY of
6 USINT
DWORD