Display Description - Hach sensION + pH31 Manual Del Usuario

User interface and navigation
User interface
Keypad description
1 RETURN key: cancel or exit the
current menu screen to the previous
menu screen
2 MEASUREMENT key: confirm the
selected option
3 UP key: scroll to other options,
change a value
4 RIGHT key: change the measuring
unit, enter numbers and letters

Display description

The meter display shows the concentration, units, temperature, calibration
status, operator ID, sample ID, date and time.
5 DOWN key: scroll to other options,
change a value
6 ON/OFF: turn on or turn off the meter
7 LEFT key: change the measuring
unit, enter numbers and letters
Figure 4 Single screen display
1 Sample ID
2 Measurement unit and value (pH,
ORP (mV))
3 Measurement mode or time and date
Navigation
Use the to return to the previous menu. Use the measure key
a sample measurement or to confirm options. Use the arrow keys
to scroll to other options or to change a value. To change the parameters
use the arrow keys and . Refer to each task for specific instructions.
Start-up
Turn the meter on and off
N O T I C E
Make sure that the probe is connected to the meter before the meter is turned on.
Push to turn on or turn off the meter. If the meter does not turn on, make
sure that the AC power supply is properly connected to an electrical outlet.
Change the language
The display language is selected when the meter is powered on for the
first time.
1. Use the or to select a language from a list.
2. Confirm with . The measurement screen shows DATA OUTPUT.
3. Select Deactivated if no printer or PC is connected and confirm. Refer
to Select the data output on page 10 for more information about Data
Output.
4 Sample temperature (ºC or ºF)
5 Visual measurement timer
to take
English 7