RIDGID R48607 Manual Del Operador página 16

ASSEMBLY
 Lift the miter lock lever to unlock the miter table.
 Press the miter detent bypass and rotate the miter table
to the left 30° position on the miter scale as shown in
figure 15.
 Tighten the remaining screw to secure the miter scale
detent plate.
PRESS THE MITER DETENT BYPASS TO
ROTATE THE MITER TABLE
FIXED
MITER
FENCE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
MITER DETENT
BYPASS BUTTON
(PRESS TO
DISENGAGE)
UNLOCKED
Fig. 16
BLADE
FRAMING
MITER
SQUARE
TABLE
Fig. 17
SQUARING THE BLADE TO THE MITER TABLE
See Figures 20 - 22
To square the blade at 0°:
 Remove the battery pack from the tool.
 Pull the saw arm all the way down and engage the lock
pin to hold the saw arm in transport position.
BLADE
FRAMING
SQUARE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
16 - English
MITER
TABLE
MITER SCALE
DETENT PLATE
SLIDING
MITER
FENCE
Fig. 18
SCALE
INDICATOR
Fig. 19