Picture Setup - Sunstech TLXRI2280HD Manual De Instrucciones

Move Channel
1. In Program Edit, move the p
2. Press the YELLOW button to summon the move function.
3. Press the p
/q
4. Press the YELLOW button to perform the move function.
Skip Channel
1. Press the p
/q
2. Press the CYAN button to perform the skip function.
Set FAV Channel
1. Press the p
/q
2. Press the FAV button to perform the favorite function.
CI Information:
Display CI card information.

PICTURE SETUP

1. Press the MENU button on the remote
controller to display the OSD main menu.
2. Press t
/u button to select the PICTURE menu.
3. Press p
/q button to select each item.
4. Press the MENU or EXIT button to exit from the menu.
Picture Mode:
Select a desired picture mode among Dynamic, Standard,Mild and User.Dynamic, Standard and
Mild are the factory preset picture mode and the parameter of those modes can not be changed. If
you want to adjust any items (e.g. Contrast, Brightness ,Clour and sharpness etc), please select
User, and the settings will be stored in User mode.
C
You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast:
Adjust the color brightness of the image.
Brightness:
Adjust the darkness and lightness of the image.
Color:
Adjust the saturation level of color.
Sharpness:
Adjust the sharpness level of image.
Tint:
Adjust the tone of color when your system is in NTSC.
USING THE MENUS
/q button to select a channel which you want to moved.
button to select a channel you want to move to.
button to select a channel which you want to skipped.
button to select a channel which you favorite.
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
EXIT
13
PICTURE
Standard
50
50
50
50
0
MENU ENTER