Sunstech TLXRI2280HD Manual De Instrucciones página 95

Hotel Lock:
Press t button to select ON or OFF.
/u
Source Lock:
Lock the input signal.
Default Source:
Set the input signal mode when you switch on the TV.
Default Program:
Set the program number when you switch on the TV.
Max Volume:
Set the maximal volume of the volume.
Clear Lock:
Clear all lock in the hotel setting menu.
Clone:
This function allows you clone the desired settings, and used to additional Tv's for some mode. The operation
is below:
1. Insert a USB drive to the USB connector.
p
/q
2. Press button to select Clone, then press ENTER button to enter.
Clone
Save to USB
Recover from USB
Note: Do not change the factory setting in the menu, or may cause the TV does not work properly.
DVD SETUP-ENABLE:
Set the function on or off. If set on, the DVD function buttons of remote control will disabled.
USING THE MENUS
Save to USB:
p
Press
button to confirm, it will display "OK" after 4 seconds if the
operation is successful. If you view USB drive content can be
found a new document "DATABASE.BIN".
Recover from USB:
Use the resulting "DATABASE.BIN" files, press
to select "Recover from USB" and press "ENTER" button to
confirm, it will into standby mode automatically after 4 seconds
if the backup data has been covered successfully.
20
/q button to select Save to USB, then press ENTER
p
/q button