Intended Use - Ottobock 17AO100 Instrucciones De Uso

Not included in the scope of delivery (see fig. 2)
Item Quant­
ity
[Piece
(s)]
1 1
2 1
The cover for the lamination dummy (see fig. 1, item 9) is not included in
the lamination dummy set.
Service sets and spare parts (see fig. 1, see fig. 2)
Item Quant­
ity
[Piece
(s)]
6 1
11 1
12 1
13 1
14 1
2 1
3 1
7 1
7 1
8 1
10 1
16 1

3 Intended use

3.1 Indications for use
The ankle joint is intended exclusively for orthotic fittings of the lower limbs
on one patient and for use only with the 17KO1=* C-Brace knee joint.
3.2 Area of application
Approved for a body weight of max. 110 kg with unilateral use.
14
Article designation
(wrench size)
Lamination dummy set
Shoulder screw (T30)
Lamination dummy – lower part
Article designation
Joint screw
Joint nut
Spring guide with ball
Compression spring
Spring buffer
Stop bumper
Stop sleeve with stop pin
Axial disc set
Sizes: 0.85, 0.90, 0.95, 1.0,
1.05, 1.10 mm
Set screw
Foot stirrup
Bearing bushing
Lamination bar
Reference number
17LD1N=22
Reference number
17AO100S=22-1
17AO100S=22-2
17AO100S=22-3
17LA33N=20
30Y450=22
17SF100=OS-22
17S100=LB-20