Update Menu; Change Password; Firmware Update; Binding Parameters Update - HellermannTyton Autotool 2000 CPK Manual De Instrucciones

HT Data Management

7.10 Update menu

1 Change password

2 Firmware update

3 Binding parameters update

4 Update additional languages
7.10.1 Change password
The password consists of four characters and the default
setting is 0000. HellermannTyton recommends setting an
alphanumeric password that includes at least one special
character.
f Click on Change.
; A Windows pop-up opens.
f Enter the current password and click on
f Enter the new password and click on
f Re-enter the new password and click on
; The password is changed.
7.10.2 Firmware update
A irmware update includes an update for many languages.
Languages such as Asiatic languages that do not use the
Latin alphabet have to be updated separately,
à „Update additional languages" on page 21.
f Click on
Firmware update power pack
or
f Click on
Firmware update
20
OK to conirm.
OK to conirm.
OK to conirm.
CPK.
tool.
There are separate HEX iles for the AT2000 CPK and the
power pack CPK.
; A Windows pop-up opens.
f Select the appropriate HEX ile.
f Click on
Open to conirm.
; The
Start upload button appears on the screen.
f Click on
Start upload.
; The new irmware is uploaded to the AT2000 CPK.
7.10.3 Binding parameters update
f Click on
Load from file.
; The name of the ile appears in
(TXT ile provided by HellermannTyton).
f Click on
Send to tool.
; The new binding parameters are uploaded to the
AT2000 CPK. The progress bar shows progress of the
data transfer in %.
AT2000 CPK• Operating Instructions • 04-2015 • 106-29004
1
2
3
4
File loaded: