Unpacking And Inspection - Amprobe 38XR-A Manual De Usuario

Ocultar thumbs Ver también para 38XR-A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Do not exceed the maximum overload limits per
function (see specifications) nor the limits marked on the
instrument itself. Never apply more than 1000V dc/750 V
ac rms between the test lead and earth ground.
• Inspect the DMM, test leads and accessories before
every use. Do not use any damaged part.
• Never ground yourself when taking measurements. Do
not touch exposed circuit elements or test probe tips.
• Do not operate the instrument in an explosive
atmosphere.
• Exercise extreme caution when: measuring voltage
>20V // current >10mA // AC power line with
inductive loads // AC power line during electrical
storms // current, when the fuse blows in a circuit
with open circuit voltage >1000 V // servicing CRT
equipment.
• Always measure current in series with the load –
NEVER ACROSS a voltage source. Check fuse first.
Never replace a fuse with one of a different rating.
• Remove test leads before opening the Battery Cover
or case.

UNPACKING AND INSPECTION

Your shipping carton should include:
1
38XR-A Digital Multimeter
1
Test leads w/ alligator clips
1
Magne-Grip® Holster
1
Clip, magnet, and strap
1
Temperature Adapter
1
K-type thermocouple
1
Users Manual
1
9 V battery (installed)
1
mA fuse, 0.5A/1000 V
3

Publicidad

Tabla de contenido
loading

Tabla de contenido