Step 4: Connecting The Bar Stand - Sony JIG-ST9_NT3 Manual De Instrucciones

Step 4: Connecting the Bar stand

Do not connect the AC power cord (mains lead) of the Bar stand to a wall outlet
(mains) until all the other connections are made.
Follow the steps below.
1
Connect the Bar stand to the HDMI IN 1 jack of the Sound Bar.
The JIG-ST9_NT3 and HT-NT3 models are used as an example.
Sound Bar
Bar stand
2
Use the High Speed HDMI cable (supplied) to connect the HDMI OUT jack of
the Sound Bar to the HDMI IN jack of the TV so that you can view the
demonstration.
3
(JIG-ST9_NT3/JIG-CT780/JIG-CT380 only)
Use the two double-sided tapes (supplied) to attach the Sound Bar to the Bar
stand.
 Remove the protection sheets on the double-sided tapes.
10
GB
AC power cord (mains lead)