Power Failure; Vacation And Moving - Haier HRT18RCW Manual Del Usuario

REFRIGERATOR CARE
To Replace the Light Bulb:
1. Unplug refrigerator or disconnect power.
2. Remove the light shield (on some models).
3. After allowing the bulb to cool, remove the burned-out
bulb, and then replace it with an appliance bulb of the same
size and shape and wattage. Refer to the chart in this sec-
tion.
4. Reinstall the light shield.
5. Plug in or reconnect power.

POWER FAILURE

If there is a power failure, do not open the freezer door.
within several hours.
If power is out for an extended period of time, check the food
for thawing.

VACATION AND MOVING

VACATION
If you will be gone for an extended period of time and do not
want to leave your refrigerator on while you are away, prepare
it for your absence.
1. Remove all items from the refrigerator and freezer
compartments, and use up or freeze elsewhere.
2. Unplug refrigerator or disconnect power.
3. Clean refrigerator. Rinse and dry thoroughly.
4. Clean door and/or drawer gaskets. See "Cleaning."
5. Tape rubber or wood blocks to the top of the door(s) and/
or drawer(s) to allow air to circulate inside. This stops odor
and mold from building up.
14
MOVING
If you are moving your refrigerator to a new home, prepare
the appliance for the move.
CAUTION
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
1. Remove all food from the refrigerator and pack all frozen
food in dry ice.
2. Unplug refrigerator.
3. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
"Leveling."
5. Tape the doors closed and tape the power cord to the
back of the refrigerator.
6. When you get to your new home, see "Reinstalling/ Using
Refrigerator Again" to prepare the refrigerator for use.
REINSTALLING/USING REFRIGERATOR
AGAIN
If the refrigerator has been placed in a horizontal or tilted
position for any period of time wait 2 to 5 hours before
plugging it in to allow the oil to settle into the compressor.
1. Clean refrigerator. See "Cleaning."
2. Place refrigerator in desired location and level. See
"Installation Instructions."
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
3. Plug into a grounded 3 prong outlet.
49-60778-1