Step 4 - Make Electrical Connection - Haier HRT18RCW Manual Del Usuario

Ocultar thumbs Ver también para HRT18RCW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS
6. With both handles mounted, align the handles.
7. Slowly open the door, and then completely tighten the
screws.
Step 2 - STAINLESS STEEL HANDLES
1. Remove door handles and hex key from freezer
compartment.
door.
of the handle with the holes on
the bottom edge of the door
and fasten with the two screws
(provided).
10
with the door, and then tighten an additional half turn.
5. Repeat above steps to install the handle to the other door.
STEP 4 - MAKE ELECTRICAL
CONNECTION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
1. Plug into a grounded 3 prong outlet.
2. Allow the refrigerator to cool for several hours before
adding food.
49-60778-1

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hrt18rcp

Tabla de contenido