Stihl FSA 65 Manual De Instrucciones página 10

English
or resin in order for you to maintain a firm
grip and properly control your power
tool.
Warning!
To reduce the risk
of personal injury
to the operator
from line contact
and thrown
objects, make sure your unit is equipped
with the proper deflector and handle for
the type of cutting attachment being
used (see chapter on "Approved Combi-
nations of Cutting Attachment and
Deflector").
Keep the deflector adjusted properly at
all times (see chapter on "Mounting the
Deflector" of your instruction manual.)
Adjust the hand grip to suit your size
before starting work. The machine
should be properly balanced for proper
control and less fatigue in operation.
Warning!
The cutting attachment must be prop-
erly tightened and in safe operating
condition. Inspect for loose parts (nuts,
screws, etc.). Regularly check the con-
dition and tightness of the cutting
attachment – with the motor stopped,
retaining latch on ƒ and battery
removed! Replace damaged cutting
attachments before using the power
tool.
Check contacts in battery compartment
for foreign matter. Keep clean.
Fit the battery correctly – it must engage
audibly.
8
For specific starting instructions, see the
appropriate section of your instruction
manual.
Warning!
Your power tool is a one-person
machine. Do not allow other persons in
the general work area, even when
starting.
During Operation
Holding and Controlling the Power
Tool
Always hold the unit firmly with both
hands on the handles while you are
working. Wrap your fingers and thumbs
around the handles.
Warning!
To reduce the risk of injury from loss of
control, never work on a ladder or on
any other insecure support. Never hold
the cutting attachment above waist
height.
Right-Handers
Right hand on the control handle and left
hand on the loop handle.
Left-Handers
Left hand on the control handle and right
hand on the loop handle.
Warning!
Never attempt to operate
your power tool with one
hand. Loss of control of
the power tool resulting
in serious or fatal injury
may result. To reduce
the risk of cut injuries, keep hands and
feet away from the cutting attachment.
Never touch a moving cutting attach-
ment with your hand or any other part of
your body.
Warning!
Do not overreach. Keep proper footing
and balance at all times. Special care
must be taken in slippery conditions and
in difficult, overgrown terrain. Watch for
hidden obstacles such as tree stumps,
roots and ditches to avoid stumbling.
For better footing, clear away fallen
branches, scrub and cuttings. Be
extremely cautious when working on
slopes or uneven ground.
FSA 65, FSA 85