Approved Combinations Of Cutting Attachment And Deflector; Adjusting The Loop Handle - Stihl FSA 65 Manual De Instrucciones

Approved Combinations of
Cutting Attachment and
Deflector
Cutting attachment
The trimmer comes from the factory with
the AutoCut C 4-2 mowing head already
fitted. For safety reasons no other
cutting attachments may be mounted to
the trimmer.
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see
"Mounting the Deflector".
FSA 65, FSA 85
Warning!
Use only the provided deflector in order
to reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
provided handle in order to reduce the
risk of injury from loss of control and
contact with the cutting attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only the provided mowing head may be
used.

Adjusting the Loop Handle

Your new power tool comes with the
loop handle mounted on the shaft, but it
must be turned and lined up to suit your
requirements.
1
N Loosen the star knob (1) on the
handle.
N
Turn the handle to the vertical
position.
English
13