Switching Off - Stihl FSA 65 Manual De Instrucciones

N
Make sure the cutting attachment is
not touching the ground or any other
objects.
N Hold the unit with both hands – one
hand on the control handle – one
hand on the loop handle.
2
N Unlock the power tool by moving the
retaining latch (2) to ‚.
2
N Push down the trigger switch
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on ‚ and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
FSA 65, FSA 85
Trigger Switch
Motor speed can be controlled with the
trigger switch. Motor speed is increased
progressively by squeezing the trigger
switch (FSA 85 only).
3
4

Switching Off

N Release the trigger switch
lockout (1) and the trigger
switch (2).
3
N Move the retaining latch (3) to ƒ –
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
English
1
2
2
19