Mounting The Deflector; Adjusting Nylon Line - Stihl FSA 65 Manual De Instrucciones

Ocultar thumbs Ver también para FSA 65:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
A
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 4.0 in
N
Slide the handle to the required
position.
N
Tighten down the star knob so that
the handle cannot be rotated on the
shaft.
14

Mounting the Deflector

1
N
Position your trimmer so that the
mowing head (1) faces up.
The motor housing has guide slots
(arrows) to correctly locate the deflector.
3
3
N
Push the deflector (2) into the guide
slots as far as stop.
N
Insert the screws (3) and tighten
them down firmly.

Adjusting Nylon Line

Adjusting Nylon Line
N
Hold the rotating mowing head
above the ground – tap it on the
ground once – about 1.2 in. of fresh
line is advanced.
1
2
The blade (1) on the deflector (2) trims
surplus line to the correct length – avoid
tapping the mowing head more than
once at a time.
Line feed operates only if both lines still
have a minimum length of 1.0 in.
If the line is shorter than 1.0 in:
N
Switch off the trimmer.
N
Move the retaining latch to ƒ and
remove the battery.
N
Turn the trimmer on its back.
N
Press down the cap on the spool as
far as stop.
N
Pull the ends of the lines out of the
spool.
If the spool is empty, see "Replacing
Nylon Line".
2
FSA 65, FSA 85

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fsa 85

Tabla de contenido