Trouble Shooting - FAR RAC 185 Instrucciones De Uso

RAC 185
SIGNALS
- Does not fasten the rivet
- Air leak
- Not ejected nail
GB

TROUBLE SHOOTING

CAUSE
- Non-powered tool
- Slipping of the clamps on the nail - Perform clamps maintenance
- Incorrect nozzle
- Unfiltered and unlubricated air
- Incorrect positioning of the
feeding tube
- Worn gaskets
- Breaks on the riveting machine
body
- Incorrect nozzle
- Closed suction system
- Full nails container
75036042- RAC 185 - rev 03 - ( 04-2019 )
SOLUTIONS
- Connect the riveting tools to the
compressed air
- Replace the nozzle as shown in
the table
- Equip yourself with lubricator
filter assembly
- Position the feeding tube correctly
- Contact the service center
- Contact the service center
- Replace the nozzle as shown
in the table
- Open the suction system
- Empty the container
49