Pur Line HOTI OR 1500 D Manual De Usuario página 12

INSTALLATION
Take the oil radiator and all components from the package and remove all packaging materials.
INSTALLATION OF CASTERS
- The castors must be attached before the heater is operated.
- Castors are supplied with the device. You must mount them on the supplied mounting plates and
then attach these to the unit before use.
WARNING: Do not operate without the castors. Only operate the heater in an upright position.
OPERATION
- Before inserting the plug into a suitable socket, make sure that the unit is intact, properly
assembled and that there is no signs of damage to the appliance or its power cable.
- To avoid overloading a circuit, connect the unit only to a circuit where no other equipment is
connected.
- When the power switch is in the OFF position, insert the plug into an earthed socket and turn on
the power.
DISPLAY
CONTROL PANEL
2
Heat
3
Timer
1
1. On / Off Button
2. Change the heat level between Low, Medium and High
3. Set the Standby / Start Timer
4. Increase desired Temperature
5. Decrease desired Temperature
EN
LOW
MEDIUM
HIGH
4
5
10
TIMER
POWER
REMOTE CONTROL
1
2
4
5
3