Makita CL070D Manual De Instrucciones página 6

► 1. Filter 2. Prefilter
Clean out fine dust from prefilter. Next, remove filter,
and lightly tap to dislodge dust.
Reassembly
1
► 1. Filter
Put on filter until it is fully in position on the cleaner unit.
NOTE:
• Make sure filter is put on straight without being
peeled back. If filter is put on incorrectly as
shown in diagram, dust will get into motor hous-
ing, and cause motor failure.
► 1. Filter
Connect prefilter. At this time, make sure to twist prefil-
ter so that securing lip is firmly locked into cleaner unit.
1
2
1
► 1. Prefilter 2. Securing lip
Connect capsule. Align projection on capsule with pro-
jection on handle and then firmly twist capsule in direc-
tion of arrow until it is secured.
1
3
► 1. Capsule 2. Handle 3. Projection
6 ENGLISH
2
1
2