Ce Declaration Of Conformity - Fermax 5276 Manual De Usuario

Cod. 97864 V04_17
User Information Transfer
The Sboard supports the User Information Transfer function, and the enrolled user (cards, PINs) can be transferred from
one (let's name it Master Unit) to another (let's name it Accept Unit). Maximum 10pcs Accepts Units can be transferred
once.
Connection Diagram:
Remarks:
The Master Units and Accept Units must be REF. 5276.
The Master Code of the Master Unit and the Accept Unit(s) must be set to the same.
Program the transfer operation on Master Unit only.
If the Accept Unit(s) are already with the users enrolled, it will be covered after transfer.
For full 1,000 users enrolled, the transfer takes 3 minutes.
Programming Step
1. Enter Program Mode
2. Set transferring
Within 3 minutes, Green LED shines, that means the users' information has been transferred
successfully.
3. Exit Program Mode

CE DECLARATION OF CONFORMITY

Hereby, FERMAX ELECTRONICA, S.A.U., declares that this STAND-ALONE CONTROLLER 1 DOOR WG Ref. 5276, is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. See website
www.fermax.com.
Keystroke Combination
* (Master Code) #
9 6 #
*
18