Publicidad
6
WORK POSITIONING and RESTRAINT
EN 358: 2000 harness for work
positioning and restraint
These attachment points are designed
only to either hold you in position at the
work-post, or to prevent you from entering
a zone where a fall is possible.
These attachment points must only be used
to attach to a restraint or work positioning
system, maximum fall height: 0.5 m.
These attachment points are not designed
for fall arrest usage. It may be necessary
6A.
6B.
4
FALCON
C385010E (080710)
to supplement work positioning or travel
restraint systems with collective or
personal fall arrest systems.
6A. Lateral belt attachment points
Always use the two lateral attachment
points together by linking them with
a positioning lanyard in order to be
comfortably supported by the waistbelt.
Verify that the connector is properly closed
and locked.
6B. Rear travel restraint attachment point
GRILLON
EN 358
Maximum height
of fall : 0,5 m
Publicidad
