Self Clean Operation; Vacancy Operation - Sharp AY-XPM7PHR Manual De Instrucciones

SELF CLEAN OPERATION

SELF CLEAN operation will reduce the
growth of mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
1
Press the SELF CLEAN button when
the unit is not operating.
• The remote control will display "
(The " " will disappear automatically in
1 minute.)
• The green SELF CLEAN lamp (
the blue PLASMACLUSTER lamp on the
unit will light up.
• The unit will stop operation after 40 min-
utes.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp will
turn off.
NOTE:
• You cannot set the temperature, fan speed, air
fl ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.

VACANCY OPERATION

H e a t i n g o p e r a t i o n w i t h 1 0 ° C s e t
temperature will be performed to protect
your home and furniture from frost
damage, even when you are out.
.
1
Press the HEAT button to start
HEAT operation.
".
2
Press the VACANCY button.
• The remote control will display " 10°C
) and
TO CANCEL
Press the VACANCY button again.
• VACANCY operation will also be cancelled
1
when the operation mode is changed, or
when the unit is turned off.
NOTE:
• VACANCY operation is not available during
AUTO mode operation and in multi system.
GB-12
°C " .
1
2