Specification; Worthy Information - Lacor 69083 Instrucciones De Uso Y Mantenimiento

MODEL:
VOLTAGE:
CYCLE:
POWER:
DIMENSIONS:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the Electric blender
We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
Electric blender is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug Electric blender into a properly grounded electrical outlet of the correct voltage, size,
and plug configuration. If the plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials.
4.- Leave a free space of at least 30 cm (12") for the frontal empying area to allow correct,
safe working.
5.- To prevent any injury or damage do not pull unit by power cord.
1.- Locate the unit at the proper counter height, in an area that is convenient for use. The
location should be level to prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.

SPECIFICATION

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
CAUTIONS
69083
200-240V
50-60Hz
250W
23x31x25 Cms.
2,92 Kgr.
19