Main Technical Specifications; Specification; Worthy Information - Lacor Mix & Go 69382 Instrucciones De Uso Y Mantenimiento

MAIN TECHNICAL SPECIFICATIONS

MODEL:
VOLTAGE:
POWER:
MOTOR:
BIG BOTTLE CAPACITY:
SMMAL BOTTLE CAPACITY:
DIMENSIONS:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the Personal blender
Mix & Go . We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
Personal blender Mix & Go is a product of extensive research and field testing. The materials used
were selected for maximum durability, attractive appearance and optimum performance. Every
unit is thoroughly inspected and tested before shipment.
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug the bell-shaped Personal blender Mix & Go into a
properly grounded electrical outlet of the correct voltage, size,
and plug configuration. If the plug and receptacle do not
match, contact a qualified electrician to determine the proper
voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
If safe distances are not maintained, discoloration or
combustion could occur. Do not locate toaster under shelving
or closer than 12" (31 cm) from the ceiling.

WORTHY INFORMATION

WARNING
!
69382
220-240V/50-60Hz
350 W
AC
600 ml
300 ml
12x12x40,5 cm
1,050 Kg
35