BABYTREND HC57XXXB Manual De Instrucciones página 10

OPERATION
TO ATTACH CAR SEAT
24) • Connect the Car Seat and lock into place
(Fig. 24a). Make sure its locked firmly in
place before use (Fig. 24b).
TO REMOVE CAR SEAT
25) • Detach Car Seat from Upper Frame
Assembly by pushing both modular
release buttons on each side of the seat
and lifting seat upwards (Fig. 25).
• ONLY approved SNAP TECH products can be
TM
used on the frame.
CAR SEAT MODE
Face in either direction,
front or backwards.
Infant car seat sold separately
17
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TODDLER SEAT ASSEMBLY
ATTENTION:
Recommended age for Toddler Seat use is 2-4
years of age.
Always assist your child into and out of the
seat.
Before using the toddler seat, remove tray
(step 16), lock wheels (step 14), before using
toddler seat.
26)
Fig. 24a
Fig. 24b
Fig. 25
• Completely remove the harness and
buckle from the product by threading
the strap ends through the seat back
(Fig. 26a).
• Remove extension tubes from the front
and rear legs by pushing the locking pins
in and pulling tubes (Fig. 26b).
• Reassemble the Front and Rear Legs
by inserting the tube ends into the Upper
Frame Assemblies (Fig. 26c).
NOTE: Legs are properly connected
when the locking pins are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the
locking pins are engaged before use.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Fig. 26a
Fig. 26b
Fig. 26c
18