Basics; Making Calls - Sony SPP-A968 Manual De Instrucciones

Basics

Making calls

(REDIAL)
(VOL/PGM)
(*TONE)
Additional tasks
To
Adjust the handset volume
Switch to tone dialing temporarily Press (*TONE) after you are connected.
Notes
• If the handset beeps every second during conversation and "OUT OF
RANGE" appears on the display, move closer to the base unit; otherwise, the
call will be disconnected after one minute.
• When you increase the sound volume, in some cases the background noise
may be increased as well. You should adjust the volume accordingly.
1
Pick up the handset from the
base unit.
2
Press (TALK) and wait until
"TALK" appears on the display.
The IN USE lamp on the base
unit lights up.
You then hear a dial tone. If you
hear five short error beeps and
"OUT OF RANGE" appears on
the display, move closer to the
base unit.
3
Dial the phone number.
During a conversation, you can
adjust the handset volume.
Follow the procedure described
in the following table.
4
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The display goes off.
Do this
During phone conversations, press
(VOL/PGM). Each press of (VOL/PGM)
switches the speaker volume by four levels.
The line will remain in tone dialing until
disconnected.
continued
17 US
Basics