Playing Back Messages - Sony SPP-A968 Manual De Instrucciones

Playing back messages

(ERASE)
(REPEAT/SLOW)
Additional tasks when playing back messages
To
Adjust the speaker volume
Stop playback
Replay the messages
Skip to the next message
Repeat the current message
Go back to previous messages
Play back slowly
Play back quickly
To erase messages
You can erase only the messages you have played back.
• To erase one message, press (ERASE) while the message is being
played back.
• To erase all messages in a mailbox, press (ERASE), and a mailbox
button ((MAILBOX 1), (MAILBOX 2) or (MAILBOX 3)) . A long
confirmation beep sounds and all messages in the selected mailbox
are erased.
Notes
• The display shows the total number of "new" messages. Therefore, it is reset
to "0" when you play back all new messages, even they are not erased yet. Be
sure to erase unnecessary messages before the memory becomes full.
• When the number of new messages exceeds 99, "99" flashes on the counter.
• If a call comes in during playback, the playback stops.
• If a power interruption occurs or the AC power adaptor is disconnected
while erasing a message, all recorded message may be erased.
Tip
You can also listen to the messages or erase the messages from a touch-tone
phone (page 38).
34 US
Answering Machine Features
Message
number
indicator
(VOLUME)
(ANSWER ON/OFF)
(SKIP/QUICK)
Do this
Press (VOLUME) (+) or (-).
Press the mailbox button again.
Press the mailbox button again.
Press (SKIP/QUICK) while the current message is playing.
Press (REPEAT/SLOW) while the current message is playing.
Press (REPEAT/SLOW) within the first three seconds of the
current message.
Keep (REPEAT/SLOW) pressed during playback.
Keep (SKIP/QUICK) pressed during playback.
When you come home
If (ANSWER ON/OFF) flashes in
red, or the display shows the
number of new messages and
the MAILBOX indicator flashes,
press the mailbox button
((MAILBOX 1), (MAILBOX 2) or
(MAILBOX 3)). The machine
plays back from the first new
message.