Setting Up; Choosing The Power Sources - Sony CFD-S40CP Manual De Instrucciones

Setting Up

Choosing the power sources

You can use the mains or batteries as a power source.
14
1
Inserting the back-up batteries
Insert four R6 (size AA) batteries (not
supplied) into the battery compartment.
These batteries work to save the
memory data.
Insert four R6 (size AA)
batteries (not supplied)
Replacing batteries
Take out the batteries as illustrated.
Battery compartment
AC IN
2
to the mains
2
Connecting the mains lead
Insert one end of the supplied mains
lead to the AC IN socket located at the
rear of the player, and the other end to
the mains.
Changing the MW tuning interval
(excluding Korean model)
If you need to change the MW tuning
interval (preset to 9 kHz at the factory), do
the following:
1 Press BAND•AUTO PRESET until
"MW" is displayed.
2 Press DISPLAY/ENTER•MEMORY for 2
seconds.
3 Press BAND•AUTO PRESET for 2
seconds.
" 9K" or "10K" flashes.
4 Turn the jog dial to select "9K" for
9 kHz interval or "10K" for 10 kHz
interval.
5 Press DISPLAY/ENTER•MEMORY.
After changing the tuning interval, you need
to reset your preset MW radio stations.
continued
GB
23