Sony CFD-G70 Manual De Instrucciones página 11

3
Tips
• Adjusting the volume or the
audio emphasis (see page
18) will not affect the
recording level.
• CFD-G70L only: If the
MW/LW programme makes
a whistling sound after
you've pressed z in step 3,
press MODE to select the
position of ISS
(Interference Suppress
Switch) that most decreases
the noise.
• For the best results, use the
AC power as a power
source.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press X.
3 Press N.
4 Press z.
5 Press X.
Press z to start recording
(N is depressed automatically).
Use these buttons for additional operations
OPERATE
(or POWER) xZ
To
stop recording
pause recording
turn on/off the player
X MODE
Press
xZ
X
Press the button again to resume
recording.
OPERATE (or POWER, see page 2)
GB
11