Faber ARKEA Manual De Instrucciones página 15

MAINTENANCE
The filter must be cleaned every 2 months of operation, or more frequently for
particularly heavy usage, and can be washed in a dishwasher.
CLEANING METAL SELF- SUPPORTING GREASE FILTER
• Open the lighting unit by pulling on the nocth.
• Remove the filter one by one pushing it towards the back side of the hood
unit and simultaneously pulling downwards.
• Any kind of bending of the filter has to be avoided when washing it. Before
fitting it again into the hood make sure that it is completely dry.
• When fitting the filter into the hood pay attention that they are mounted in
correct position the handle facing outwards.
• Replace the lighting unit.
Activated Charcoal Filter (Recirculation Version)
This cannot be washed or regenerated, and must be changed approximately
once every 4 months, or more frequently in the case of particularly intensive
use.
• Open the light unit.
• Remove grease filter.
• Remove the saturated Activated Charcoal Filters, as indicated (A).
• Fit the new Filters, as indicated (B).
• Fit the anti-grease filter and the Light Unit back into position.
Warning: This appliance is fitted with a white LED lamp classed as 1M according to EN
60825-1: 1994 + A1:2002 + A2:2001 standards; maximum optical power emitted
@439nm: 7µW. Do not look directly at the light through optical devices (binoculars,
magnifying glasses...).
• For replacement contact technical support. ("To purchase contact technical support")
EN
Grease filter
CHANGING
Lighting unit
A
B
1 15