Faber ARKEA Manual De Instrucciones página 16

Additional information for the installation technician
Hood canopy lighting
It is possible to adjust the colour and intensity of the hood canopy lighting
• Open the lighting unit by pulling on the notch provided.
• Adjust the lighting, using the buttons on button pad B, following the indications provided on
C
the label
A
Procedure to be used in case of malfunction on the movement
• Check that the fuse is properly inserted and that it has not burned out, for replacing the
fuse open the lighting unit and unscrew the fuser holder and replace it with one having
the same characteristics (Rif.A)
• Check that the hood canopy is fitted level.
• Check that the four cables are all at the same tension.
If even these operations do not solve the problem contact the Technical Assistance.
EN
C
B
1 16